Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS
Choose a sub category:
JOIST HANGERS FRAMING ANGLES/ANCHORS MENDING PLATES
NAIL PLATES POST ANCHORS / CAPS FENCE BRACKETS
BRIDGING STRAPS PLYWOOD CLIPS
BRICK/WALL TIES MISC CONSTR HARDWARE
Sort By:
1 2 3 ... 5
TIE HURR 18GA 6IN GALV        TIE STRAP NO9GALV 20GA        BRIDGING NAILLESS 2X10IN
Designed to provide seismic and wind ties for trusses or joists, this versatile line may be used for general tie purposes, strongback attachments and as all-purpose ties where one member crosses another. Use (12) 8dx1-1/2 nails. Meets IAPMO UES ER-102, 112; L.A. City RR5814 and FL11478. Straps are designed to transfer tension loads in a wide variety of applications. LSTA straps are designed for use on the edge of 2x members with a nailing diaphragm decking and wood chord open web trusses. Meets IAPMO UES ER-102, 124, ICC-ES-ESR-2105, 2523, 3096, L.A. City RR25713, 25489, 25910 and FL10852, 13872. Eliminates callbacks for nail squeaks; designed for secure grip before the drive-home blow and deeper prong penetration; precision-formed into a rigid "V" section. Meets ICC-ES-ESR-2608, 2523, L.A. City RR25725 and FL10864 codes.
TIE STRAP NO12GALV 20GA       STRAP TIE GALVANIZED 20GA     HNGR JOIST 2X8IN 18GA GALV
Straps are designed to transfer tension loads in a wide variety of applications. LSTA straps are designed for use on the edge of 2x members with a nailing diaphragm decking and wood chord open web trusses. Meets IAPMO UES ER-102, 124, ICC-ES-ESR-2105, 2523, 3096, L.A. City RR25713, 25489, 25910 and FL10852, 13872. Straps are designed to transfer tension loads in a wide variety of applications. LSTA straps are designed for use on the edge of 2x members with a nailing diaphragm decking and wood chord open web trusses. Meets IAPMO UES ER-102, 124, ICC-ES-ESR-2105, 2523, 3096, L.A. City RR25713, 25489, 25910 and FL10852, 13872. Distributes the load through two points on each joist nail for greater strength; it also allows the use of fewer nails, faster installation and the use of standard nails for all connections. Do not bend or remove tabs. Use hot-dip galvanized (HDG) nails with ZMAX and HDG connector products; 16d sinkers may be used where 10d commons are specified with no reduction in load; with 3x carrying members, use 16dx2-1/2" nails into the header and 16d commons into the joist with no load reduction; with 2x carrying members, use 10dx1-1/2" nails into the header and 10d commons into the joist, reduce the load to 0.64 of the tabel value. Meets ICC-ES-ESR-2549, 2523, 3096, L.A. City RR25807, 25910 and FL10655.
HANGER JST TPL SHR 18GA 2X8IN L-ANGLE  ADJUSTABLE 5IN 18GA  TIE STRINGER ADJUSTABLE 18GA
Distributes the load through two points on each joist nail for greater strength; it also allows the use of fewer nails, faster installation and the use of standard nails for all connections. Do not bend or remove tabs. Use hot-dip galvanized (HDG) nails with ZMAX and HDG connector products; 16d sinkers may be used where 10d commons are specified with no reduction in load; with 3x carrying members, use 16dx2-1/2" nails into the header and 16d commons into the joist with no load reduction; with 2x carrying members, use 10dx1-1/2" nails into the header and 10d commons into the joist, reduce the load to 0.64 of the tabel value. Meets ICC-ES-ESR-2549, 2523, 3096, L.A. City RR25807, 25910 and FL10655. Used to reinforce 90? connections; staggered fastener pattern reduces the chances of wood splitting; stronger than angled nailing or screw fastening; cut-outs along the bend line make bending easier (may be bent from 0 to 135?); "ZMAX" galvanization offers extra corrosion resistance for exterior and treated-wood applications; install with 10d common nails or #9 x 1-1/2" "Strong-Drive" SD screws. Suitable for installation on 2" x 10" or 2 x 12" header/rim joist; may be installed flush with the top of the carrying member or lower on the face; interchangeable for left or right applications; "ZMAX" galvanization offers extra corrosion resistance for exterior and treated-wood applications; install with (17) 10d x 1-1/2" nails or #9 x 1-1/2" "Strong-Drive" SD screws.
HNGR ADJ GALV 2X6IN 18GA      CLP SHEATHING 1/2IN STL       CLP SHEATHING 7/16IN STL
This product is preferable to similar connectors because of easier installation, higher loads and lower installed cost; attach the sloped joist at both ends so that the horizontal force developed by the slope is fully supported by the supporting members; adjustments can be made in the field; "ZMAX" galvanization offers extra corrosion resistance for exterior and treated wood applications; install with 10d common and 10d x 1-1/2" nails. Quick installation, no nails required; keeps panels even for a level structural plane; provides the 1/8" space between plywood panels as recommended by the American Plywood Association; use the same size sheathing clip as the panel thickness; galvanized for extra corrosion resistance. Quick installation, no nails required; keeps panels even for a level structural plane; provides the 1/8" space between plywood panels as recommended by the American Plywood Association; use the same size sheathing clip as the panel thickness; galvanized for extra corrosion resistance.
6650 1-1/2IN X 3IN PLATE WOOD BRACKET SADDLE DECO 4IN BLACK STRIP DCK FRAME WTRPF 3INX72FT
Protector plate. Meets requirement of CEC rule 12-616.? Connects wooden posts to concrete footings for deck supports. Made of galvanized steel and powder coated black. Made from standard tarred roof paper, this impermable band prevents wood decay; larger than the simple joist, it diverts water to each side; offers maximum protection for your deck; just unroll it on the frame structure and staple it.
SADDLE 4X4IN GALV CARPORT     BS PST 4X4IN 12GA GALV        HNGR JOIST 16GA 2X10IN
Use for connecting post to concrete; hot dipped galvanized; use (4) 16d fasteners for installation. Provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Uses (12) 16d nails for installation. Allowable loads: 1485 lbs. non-cracked and 1040 lbs. cracked. Meets ICC-ES-ESR-3050, L.A. city RR25985 and FL10849 codes. Can accommodate joists skewed 40 to 50 degrees; angled nail slots direct nails for proper installation; "ZMAX" galvanization offers extra corrosion resistance for exterior and treated-wood applications; install with 16d common nails in the header and 10d x 1-1/2" nails in the joist.
STRIP FRM WTHRPRF 4-1/2INX72FT HNGR JOIST 16GA 2X10IN        CLP PLYWD 20GA 7/16IN 250/BG
Can accommodate joists skewed 40 to 50 degrees; angled nail slots direct nails for proper installation; "ZMAX" galvanization offers extra corrosion resistance for exterior and treated-wood applications; install with 16d common nails in the header and 10d x 1-1/2" nails in the joist. Quick installation, no nails required; keeps panels even for a level structural plane; provides the 1/8" space between plywood panels as recommended by the American Plywood Association; use the same size sheathing clip as the panel thickness; galvanized for extra corrosion resistance.
BRACKET SADDLE DECO 6IN BLACK DECKBRACKET GALVANIZED STRATTO BASE COLUMN GALVANIZED 12GA
Connects wooden posts to concrete footings for deck supports. Made of galvanized steel and powder coated black. "Stratton Bracket". Galvanized steel. Help connect posts to the concrete for a broad range or members. Install with 12-16d nails and (2) 1/2" machine bolts.
CLP PLYWD 20GA 3/8IN 250/BG   CLP PLYWD 20GA 1/2IN 250/BG   CLP PLYWD 20GA 5/8IN 250/BG
Quick installation, no nails required; keeps panels even for a level structural plane; provides the 1/8" space between plywood panels as recommended by the American Plywood Association; use the same size sheathing clip as the panel thickness; galvanized for extra corrosion resistance. Quick installation, no nails required; keeps panels even for a level structural plane; provides the 1/8" space between plywood panels as recommended by the American Plywood Association; use the same size sheathing clip as the panel thickness; galvanized for extra corrosion resistance. Quick installation, no nails required; keeps panels even for a level structural plane; provides the 1/8" space between plywood panels as recommended by the American Plywood Association; use the same size sheathing clip as the panel thickness; galvanized for extra corrosion resistance.
DECK BENCH BRKT 2X4IN SAND    BRACKET BENCH STEEL KHAKI     BRACKET BENCH STEEL CEDAR
You determine the size. Connect with railing brackets with 2x4 and 2x6 lumber to easily add a bench to any size or shape deck. Gain increased seating area while using only 7" of deck space. Assembled unit stands 36"H for deck railing, seat is 17"H. Quick and easy to assemble using basic tools. Includes bench bracket, hardware and instructions. LUMBER NOT INCLUDED. Steel bench bracket for uses on decks, balconies and docks.  Simple & useful, uses only 5" of the deck floor space. Installation screws included, ACQ Compatible.  9 7/8". Steel bench bracket for uses on decks, balconies and docks.  Simple & useful, uses only 5" of the deck floor space. Installation screws included, ACQ Compatible.  9 7/8".
   
 
1 2 3 ... 5